EPSITRON® Function Description 33
787-1668 Electronic Circuit Breaker
Manual
Version 1.1.0
Pos: 52 /S eri e 7 87 ( EPSIT RON)/F un ktions besc hreibu ng/Ei nschal ten vo n kapazi tive n Laste n 787-16 6x @ 12\ mod_1341401971175_21.docx @ 98843 @ 233 @ 1
6.3 Activating Capacitive Loads
High capacitive loads can be applied using the electronic circuit breaker. The
power supply unit providing power to the device must be capable of supplying a
voltage of at least 18 VDC, even at the maximum required current. The required
current can be set using the rotary switch.
The tables below gives some standard reference values determined in experiments
with 24 VDC input voltage:
6.3.1 Reference Values for 787-1668 and 787-1668/0106-0000
Table 17: Standard reference values for 787-1668 and 787-1668/0106-0000
(m) for feed
and return
(µF) with a wire
cross section of
2
(µF) with a wire
cross section of
2
(µF) with a wire
cross section of
2
* Capacities determined with a base load of 10 A/6 A at the output channel.
6.3.2 Reference Values for 787-1668/0006-1000
Table 18: Standard reference values for 787-1668/0006-1000
(m) for feed
and return
(µF) with a wire
cross section of
2
(µF) with a wire
cross section of
2
(µF) with a wire
cross section of
2
* Capacities determined with a base load of 6 A at the output channel.
Pos: 53 /S eri e 7 87 ( EPS ITR ON)/F u nkti ons besc hr eibu ng/B etr iebs zus tä nde , Sig nali si eru ng, R ea ktio nen 787- 166x @ 12\mod_1341474059753_21.doc x @ 98960 @ 2 @ 1