smartPRINTER Operating Instructions
smartPRINTER Operating Instructions 003/10.2017 4
2. Guidelines, Standards and Approvals
2.1 Declaration of Conformity
This device has been developed and fabricated in conformity with the following EU Directives:
Low Voltage Directive 2014/35/EU
EMC Directive (electromagnetic compatibility) 2014/30/EU
RoHS Directive 2011/65/EU
It has been tested according to the following harmonized standards:
EMC Standard: EN 55022:2010/AC:2011 ClassA
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 55024: 2010
LVD Standard: EN 60950-1: 2006 /A11:2009 /A1:2010 /A12:2011
/A2:2013
The requirements for CE marking are met.
This declaration loses its validity if the machine or purpose of use changes without coordination with
WAGO.
To Next Page
Loading...
Need help?
General
