Waldbeck Halley User Manual (English)

Questions and Answers:

P
perezdarrellAug 15, 2025
What to do if the Waldbeck Halley Weather Station outdoor sensor is not reporting?
- T
  Teresa CummingsAug 15, 2025
  If the outdoor sensor on your Waldbeck Weather Station isn't reporting to the base unit, showing dashes on the app or website, here's what you can do: 1. Check the outdoor transmission LED to ensure it's flashing normally according to the sensor's reporting interval. If you've recently replaced the batteries, verify they're correctly inserted and reseat them. If the batteries are old, replace them. If the LED flashes normally after these checks, proceed to the next step. If not, and you've confirmed the battery placement, the unit might be defective. 2. Ensure the gateway is powered on and the WiFi LED is steadily lit. Then, go to the “Sensor ID” page, locate the offline sensor picture, and click “Re-register”.
T
Timothy DavisAug 18, 2025
How to calibrate humidity on Waldbeck Weather Station?
- T
  Timothy LeAug 18, 2025
  If the indoor and outdoor humidity readings on your Waldbeck Weather Station don't match during indoor testing, follow these steps: The procedure is the same as for temperature discrepancies. Ensure both sensors are in the same room and allow them to stabilize. The sensors should agree within 10% (the sensor accuracy is ±5%). If discrepancies persist, use calibration offsets for one or both sensors to align with a known, accurate humidity reference.
C
Christopher GreenAug 22, 2025
How to fix Waldbeck Halley Weather Station not reporting data to Wunderground.com?
- M
  Maria WilsonAug 22, 2025
  To ensure your Waldbeck Weather Station reports data correctly to Wunderground.com, first, double-check that your station ID is entered correctly; it's case-sensitive, and make sure you haven't mixed up the capital letter 'O' with the number '0'. Second, verify that the password (key) is correct by logging into wunderground.com and checking it under 'My PWS'. Finally, confirm that the date, time, and time zone are accurate in the WS View app. Also, ensure your router firewall isn't blocking port 80, which the gateway uses to send data.
C
Crystal ChambersAug 28, 2025
What to do if Waldbeck Weather Station outdoor sensor is not reporting?
- S
  Sherry TannerAug 28, 2025
  If your Waldbeck Weather Station's outdoor sensor isn't reporting to the base unit, resulting in dashes (--) on the app or website, check the following: * Verify the outdoor transmission LED is flashing normally according to the sensor reporting interval. If not, and the batteries were recently replaced, check the correct polarity or reseat the batteries. If the batteries are old, replace them. * If the LED is still not flashing after battery checks, the unit may be defective. * Make sure the gateway is powered and the WiFi LED is steady. Go to the “Sensor ID” page, find the offline sensor picture and press “Re- register” to register.
V
Victoria ArmstrongSep 1, 2025
Why indoor and outdoor temperatures on Waldbeck Halley Weather Station do not agree?
- D
  Dr. Cynthia PierceSep 1, 2025
  If the indoor and outdoor temperatures on your Waldbeck Weather Station don't match during indoor testing, test with both sensors in the same room and allow up to one hour for them to stabilize. The sensors should agree within 2 °C (the sensor accuracy is ±1°C). If discrepancies persist, use calibration offsets for one or both sensors to match a known, reliable temperature.
J
Jennifer WilliamsSep 4, 2025
What to do if indoor and outdoor humidity on Waldbeck Weather Station do not agree?
- C
  Crystal CampbellSep 4, 2025
  If the indoor and outdoor humidity readings on your Waldbeck Weather Station don't match during indoor testing, follow the same procedure as for temperature discrepancies. Place both sensors in the same room and allow up to one hour for stabilization. The readings should agree within 10% (the sensor accuracy is ± 5 %). If they still disagree, use calibration offsets to adjust one or both sensors to a trusted reference humidity level.
M
Matthew SinghSep 7, 2025
How to correct the time on Waldbeck Weather Station?
- N
  Natalie BarberSep 7, 2025
  If the time displayed on your Waldbeck Weather Station is incorrect, ensure that your time zone and daylight saving time settings are correct. This is necessary even when connected to the Internet via Wi-Fi.
R
Robert MartinezSep 12, 2025
Why relative pressure on Waldbeck Weather Station does not agree with official reporting station?
- C
  Carrie RichardsSep 12, 2025
  If the relative pressure reading on your Waldbeck Weather Station doesn't match the official reporting station, first, ensure you're viewing relative pressure (sea-level equivalent) and not absolute pressure, especially if your station isn't near sea level. Check again at different times to account for potential delays in updates to the official station. The barometer is accurate to ± 0.09 inHg (3 hPa) within a relative pressure range of 20.67 to 32.50 inHg (700 – 1,100 hPa), corresponding to altitudes from 9,000 ft (2,750 m) down to 2,500 ft (750 m) below sea level. Expect reduced accuracy and non-linearity at higher altitudes.

Waldbeck Halley Specifications

General

Rainfall Measurement Range	0 to 9999 mm
Measurement Parameters	Temperature, Humidity, Wind Speed, Rainfall, Barometric Pressure
Humidity Range	1% to 99%
Outdoor Humidity Range	1% to 99%
Wireless Range	328 ft
Power Supply	Battery
Display	LCD
Data Storage	Yes

Summary

TECHNISCHE DATEN

LIEFERUMFANG

Lists the items included in the product package.

SICHERHEITSHINWEISE

SCHNELLSTARTANLEITUNG

GERÄTEÜBERSICHT UND FUNKTIONSTASTEN

INSTALLATION

Temporäre Installation

Recommends testing the station in a temporary location before final installation.

Bestimmung eines geeigneten Standortes

Outlines factors to consider when choosing the best site for the weather station.

Installation der Windfahne

Step-by-step instructions for attaching and orienting the wind vane.

Installation des Windgeschwindigkeitssensors

Instructions for mounting and ensuring free rotation of the wind speed sensor.

Batterieinstallation

Details how to insert batteries into the sensor and check the LED indicator.

Installation des Außensensors

Explains how to mount the outdoor sensor array onto a pole using U-bolts.

Reset-Taste und Übertragungs-LED

Describes how to reset the sensor if it fails to transmit data and the function of the LED.

INBETRIEBNAHME UND BEDIENUNG

Bewährte Verfahren zur Gewährleistung der drahtlosen Übertragung

Provides tips for optimal wireless communication, avoiding interference and obstructions.

Empfänger (Receiver)

Lists the hardware requirements for the receiver, such as a broadband router.

LIVE-INTERNETVERÖFFENTLICHUNG

Die Wetterstation mit dem Internet verbinden (WLAN)

Guides on connecting the weather station console to the internet via Wi-Fi.

App-Download

Instructs on downloading the necessary mobile application for Wi-Fi configuration.

Gerät konfigurieren

Step-by-step process to configure the device and connect it to the network.

Upload-Einstellungen

Details how to configure settings for uploading data to selected weather services.

Hinzufügen von Wetterdiensten

Explains how to add or configure specific weather services like Ecowitt or Weather Underground.

ECOWITT WEATHER

Specific instructions for configuring the Ecowitt Weather service.

Anzeige der Daten auf ecowitt.net

How to view sensor data and historical information on the ecowitt.net website.

WEATHER UNDERGROUND

Specific instructions for registering and using the Weather Underground service.

Anzeige der Daten auf wunderground.com

How to view sensor data and historical information on the wunderground.com website.

VERWALTEN VON GERÄTEN UND EINSTELLUNGEN

Wunderground verwalten

Instructions for managing WU Station IDs, adding or deleting them.

Einstellungen

How to set display units and the default home page for the app.

Ecowitt verwalten

Instructions on how to manage the device and view its data via the Ecowitt interface.

REINIGUNG UND PFLEGE

Regenmesser reinigen

Instructions for cleaning the rain gauge to ensure accurate measurements.

Sonnenstrahlungssensor und Solarmodul reinigen

Guidance on cleaning the solar radiation sensor and solar panel.

Batterien ersetzen

How and when to replace batteries in the outdoor sensor for optimal performance.

FEHLERSUCHE UND FEHLERBEHEBUNG

Der Außensensor stellt keine Verbindung mit der Konsole (dem Gateway) her.

Troubleshooting steps for when the outdoor sensor fails to connect to the console.

Es werden keine Daten an Wunderground.com übertragen.

Troubleshooting steps when data is not uploading to Wunderground.com.

Keine WLAN Verbindung / Gateway Konfiguration fehlgeschlagen

Solutions for issues related to Wi-Fi connection or gateway configuration failure.

BEGRIFFSERKLÄRUNG

Absoluter Luftdruck

Defines absolute air pressure and its relation to altitude and weather conditions.

Barometer

Defines a barometer as an instrument for measuring atmospheric pressure.

Hygrometer

Defines a hygrometer for measuring relative humidity.

Kalibrierung

Defines calibration as a comparison between measurements for accuracy.

SPEZIELLE ENTSORGUNGSHINWEISE FÜR VERBRAUCHER IN DEUTSCHLAND

Rücknahmepflicht der Vertreiber

Outlines the obligations of retailers regarding the return of old devices.

HINWEISE ZUR ENTSORGUNG

KONFORMITÄTSERKLÄRUNG

Related product manuals

Waldbeck Halley User Manual

Table of Contents