18
For your safety
ENG
Risk of burns
Hot surfaces can result in burns to the skin.
X Do not touch the light during operation.
X Do not touch the light until it has cooled
down.
Hazard caused by unsuitable spare parts
Unsuitable spare parts can result in injuries
and material damage.
X Only use spare parts approved by the
manufacturer.
Danger due to incident laser beam
Direct or indirect incidence of a laser beam
may result in the destruction of the LED.
X Use the luminaire only outside the
impact range of high-performance
lasers such as a cutting laser.
Danger due to high ambient temperature
Exceeding the allowed ambient tempera-
ture will shorten the service life of the elec-
tronic components.
X Do not exceed the maximum permissi-
ble ambient temperature.
X Avoid direct exposure to sunlight.
1.3 Warning levels
DANGER
Warning against hazards that result directly
in serious injuries or death in case of
non-observance.
WARNING
Warning against hazards that may result
in serious injuries or death in case of
non-observance.
CAUTION
Warning against hazards that may result in
injuries in case of non-observance.
NOTICE
Warning against hazards that may result
in material damage in case of non-ob-
servance.
To Next Page
Loading...
