Waldorf IN8200E INL8200E INB8200E INLB8200E IN8400E INL8400E INB8400E INLB8400E Operation Manual

13
Commissioning
1. Before leaving the new installation;
a. Check the following functions in accordance with the operating instructions specified in the
'Operation' section of this manual.
• Light the Griddle.
• Light the Open Burners. (F - Flame Failure Option).
• Light the Open Burners. (PF - Pilot and Flame Failure Option).
• Check the Low Fire Burner Operation.
• Check the High Fire Burner Operation.
• Check the Oven Heating.
• Check the Oven Thermostat Operation.
• Check the Oven Fan Operation. (GEC Models only).
b. Ensure that the operator has been instructed in the areas of correct lighting, operation, and
shutdown procedure for the appliance.
2. This manual must be kept by the owner for future reference, and a record of the
Date of
Purchase,
Date of Installation and Serial Number of the Appliance recorded and kept with
this manual.
(These details can be found on the Rating Plate attached to the front right
hand corner of the bottom sill. Refer to the ‘Gas Connection’ section).
NOTE: If for some reason it is not possible to get the appliance to operate correctly, shut off the
gas supply and contact the supplier of this appliance.
Installation

Waldorf IN8200E INL8200E INB8200E INLB8200E IN8400E INL8400E INB8400E INLB8400E Specifications

General

Brand	Waldorf
Model	IN8200E INL8200E INB8200E INLB8200E IN8400E INL8400E INB8400E INLB8400E
Category	Cooktop
Language	English