18
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker
®
replacement parts. Effective Date 08-01-08
DSD42 DECK ASSEMBLY (P/N 5707-10)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619 PTO Shaft Guard 1
8618 PTO Shaft Guard Assembly
*
(Includes Items # 1, 2, F002 & F025)
3 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 22, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 5275-15 U-Joint Tube Assy (9.5" OAL), Spline 1
(Includes Item # F076)
6 5704-51 Gearbox and Tube Assembly 1
(Includes Items # 7-17, F124, F136,
F179, F211 & F229)
5704-54 Heavy Duty Gearbox and Tube Assembly
**
(Includes Items # 8-17, F136,
F179, F211 & F229)
7 5706-4 Seal Protector Plate 2
8 6054 Spline Coupling 4
9 P007 Gasket, Cap (Peerless #788030) 4
10 5063 Gearbox Connector Tube (8-5/8) 1
11 6732-3 Connecting Shaft (6-1/4) 1
12 5052-1 Gearbox (LH Rotation) 1
5052-5 Heavy Duty Gearbox (LH Rotation)
**
13 5704-1 Gearbox Cover Support 2
14 5051-16 Tee Gearbox, Shear 1
5051-6 Heavy Duty Tee Gearbox, Shear
**
15 6732-1 Connecting Shaft (2") 1
16 5062 Gearbox Connector Tube (4-3/8) 1
17 5053-1 Gearbox (RH Rotation) 1
5053-5 Heavy Duty Gearbox (RH Rotation)
**
18 5052-3 1.375 x .750 x .187 Washer 4
19 5747-11 Rubber Mat (3 x 6) 2
20 5785-5 42" Gearbox Cover 1
(Includes Item # 19)
21 5830 Grease Fitting 1
22 8067-13 Shear Pin w/Cotter (Set of 5)
*
(Includes Item # F069)
Deck Housing Components
23 8670 Tilt-Up Hook 1
24 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
25 8490 Roller Wheel Axle Bolt 2
26 NS Deck Serial Number Plate 1
27 5705-3 Blade, 22" (RH Rotation) 2
5705-7 42 SD Blade Set with Hubs
*
(Includes Items # 27, 28, F002 & F202)
28 5706 Blade Hub & Trash Guard 2
29 7775-1 Hitch Pin, LH (Silver) #6 2
30 8735-10 Rubber Mat (5 x 6) 2
31 8788-1 Rubber Mat (1 x 2) 1
32 5703-3 42 SD Deck Housing 1
(Includes Items # 30 & 31)
33 7775-2 Hitch Pin, RH (Gold) #6 2
34 5709-2 36/42 SD Discharge Shield 1
35 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 6
F004 1/4-20 Keps Nut 2
F013 3/8-16 Whiz Locknut 6
F014 3/8-16 ESNA Nut 2
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F038 3/8-16 x 1 Hex Bolt 4
***
F039 3/8-16 x 1-1/4 Hex Bolt 6
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 2
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 4
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw
*
F124 10-32 x 3/8 Taptite Machine Screw 6
F136 AN960C416L Washer 16
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 12
F229 C-Clip (13/16) 4
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer 4
***
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS, SS 2
* Service Part Only
** Item(s) used on the Heavy Duty version of standard gear-
boxes. The Heavy Duty cast iron gearboxes are interchange-
able with Standard aluminum gearboxes.
*** Used on Heavy Duty gearbox configuration.
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MT, MD, MC and MW.
NOTE: Order Item # 5 to use the splined deck PTO shaft with
Model MS and MB.
To Next Page
Loading...
