26
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker
®
replacement parts. Effective Date 08-01-08
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619 PTO Shaft Guard 1
8618 PTO Shaft Guard Assembly
*
(Includes Items # 1, 2, F002 & F025)
3 7285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 25, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 7794 48 GHS Discharge Chute W/O Spring 1
(Includes Items # 5, 9, 10, F223 & F224)
7794-1 Discharge Chute Assembly with
Spring Mount
*
(Includes Items # 5, 7, 9, 10, F223 & F224)
6 5704-58 Gearbox and Tube Assembly 1
(Includes Items # 11-20, F124,
F136, F179, F211 & F229)
5704-9 Heavy Duty Gearbox and Tube Assembly
**
(Includes Items # 11-14, 16-20,
F136, F179, F211 & F229)
7 8678 Spring Mount, Chute 1
8 8677 Extension Spring (1 x 6-1/16) 1
9 7726 Chute Hinge (2 x 11) 1
10 7755 Chute Lower Lip 1
11 6054 Spline Coupling 4
12 P007 Gasket, Cap (Peerless #788030) 4
13 5066 Gearbox Connector Tube (9-5/16) 1
14 6732-6 Connecting Shaft (7") 1
15 5706-4 Seal Protector Plate 2
16 5052-1 Gearbox (LH Rotation) 2
5052-5 Heavy Duty Gearbox (LH Rotation)
**
17 5704-1 Gearbox Cover Support 2
18 7751-16 Tee Gearbox (1.2:1 Ratio) 1
7751-5 Heavy Duty Tee Gearbox (1.2:1 Ratio)
**
19 6732-2 Connecting Shaft (4-1/8) 1
20 5061 Gearbox Connector Tube (6-11/16) 1
21 5052-3 1.375 x .750 x .187 Washer 4
22 5747-12 Rubber Mat (3 x 6) 2
23 7785-3 48" Gearbox Cover 1
(Includes Item # 22)
24 5830 Grease Fitting 1
25 8067-10 Shear Pin w/Cotter (Set of 5)
*
(Includes Item # F069)
Deck Housing Components
26 8670 Tilt-Up Hook 1
27 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
28 8490 Roller Wheel Axle Bolt 2
29 NS Deck Serial Number Plate 1
30 7705-1 Blade, 25" (RH Rotation) 1
31 5706 Blade Hub & Trash Guard 2
32 7705-2 Blade, 25" (LH Rotation) 1
7705-3 48 GHS Blade Set with Hubs
*
(Includes Items # 30-32, F002 & F202)
33 7775-1 Hitch Pin, LH (Silver) #6 2
34 8735-10 Rubber Mat (5 x 6) 2
35 8788-1 Rubber Mat (1 x 2) 1
36 7701 48 GHS Deck Housing 1
(Includes Items # 34 & 35)
37 7775-2 Hitch Pin, RH (Gold) #6 2
38 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 9
F004 1/4-20 Keps Nut 2
F005 1/4-20 ESNA Nut 2
F013 3/8-16 Whiz Locknut 6
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F036 1/4-20 x 1/2 SBH Screw 2
F038 3/8-16 x 1 Hex Bolt 4
***
F039 3/8-16 x 1-1/4 Hex Bolt 4
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 2
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 2
F069 3/32 x 1/2 Cotter Pin 1
F087 #10 x 7/8 Fender Washer 2
F124 10-32 x 3/8 Taptite Machine Screw 4
F129 10-24 x 1/2 PTHMS 3
F136 AN960C416L Washer 16
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 12
F223 3/16 x 5/16 Semi-Tube Rivet
*
F224 3/16 x 7/16 Semi-Tube Rivet *
F229 C-Clip (13/16) 4
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer
4***
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS, SS 2
* Service Part Only
** Item(s) used on the Heavy Duty version of standard gear-
boxes. The Heavy Duty cast iron gearboxes are interchange-
able with Standard aluminum gearboxes.
*** Used on Heavy Duty gearbox configuration.
DGHS48 DECK ASSEMBLY (P/N 7702-1)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
To Next Page
Loading...
