Specications
6
MODEL MC
DRIVE BELTS
Engine PTO Walker P/N 8230
Jackshaft Drive Gates 3VX385 (or Walker P/N 6251-1)
Ground Drive, Micro-V Walker P/N 7248
Blower (GHS Model) Walker P/N 7234-2
GHS SYSTEM (Optional)
Blower
4-1/2 x 10-1/2 x 1/2 in. (11 x 27 x 1 cm) Three-Blade Paddle Wheel
(Driven by Mower Engine)
Blower Brake
Band Brake [Works in Combination with PTO Clutch, Stops
Blower within Five (5) Seconds of PTO Disengagement]
Max. Blower Speed 3600 RPM
Grass Catcher Capacity* 93 Gallons (352 liters)/10.0 Bushels
Optional Grass Catcher Capacity 63 Gallons (238 liters)/6.7 Bushels
Full Signal (Grass-Pak
®
Switch)
Oscillating Vane Switch Mounted on Grass Delivery Spout Triggers
Horn Signal
Powerl
®
Oscillating Delivery Spout Driven by 12 Volt Electric Gearmotor
Spreads Material throughout Interior of Catcher @ 25 Cycles/Minute
SEAT
Contour-Molded, with Nylon Backed Vinyl Cover and Integral
Foam Cushion
FRAME/BODY CONSTRUCTION
Frame All Welded Unitized Steel Chassis
Body 14 Gauge Steel
Deck 11 Gauge Steel
GHS Catcher and Chutes Molded Cross-Linked Polyethylene (UV Stabilized)
*Optional (6.7 Bushel) Grass Catcher subtracts approx. 5 lb (2 kg) and 5 in. (13 cm) in Height
NOTE: The manufacturer reserves the right to make changes in specications shown herein at any time
without notice or obligation.
To Next Page
Loading...
Need help?
General
