EasyManua.ls Logo

Walker MC - Page 109

Walker MC
256 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page: 3-7
WALKER MANUFACTURING COMPANY
July 2006
SERVICE INSTRUCTIONS
MAINTENANCE SCHEDULE CHART - RECOMMENDED SERVICE INTERVALS - MODEL MW
Service Item
Daily
25
Hours
50
Hours
100
Hours
200
Hours
Ref.
Page
Check Engine Crankcase Oil Level x 2-3
Check/Clean Engine Air Intake Screen* x 3-27
Check for Loose or Lost Nuts and Screws x
Clean Grass Buildup Under Deck x 3-28
Service Mower Blades x 3-13
Lubricate Grease Fittings and Oil Points* x 2-15
Check Tire Pressure x 3-12
Check Drive Belts (PTO, Ground Drive) x 3-14
Check PTO and Deck Gearbox Oil Seals x 3-15
Clean Air Filter Foam Element* x 3-26
Inspect Air Filter Paper Element* x 3-26
Change Engine Crankcase Oil** x 2-5
Clean and Regap Spark Plugs x
Clean Engine Cooling Fins x 3-27
Change Engine Oil Filter x2-5
Check Fuel Lines and Clamps x 3-15
Check/Adjust Blade/Brake Action x 3-17
Replace Air Filter Paper Element* x 3-26
More often in extremely dusty or dirty conditions
∗∗ Change engine oil and filter after first 8 hours of operation of a new engine (break-in period)
CAUTION
Maintenance procedures requiring special training or
tools should be performed by a trained technician.

Table of Contents

Related product manuals