EasyManua.ls Logo

Walker MC - Page 110

Walker MC
256 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page: 3-8
WALKER MANUFACTURING COMPANY
July 2006
SERVICE INSTRUCTIONS
MAINTENANCE SCHEDULE CHART - RECOMMENDED SERVICE INTERVALS - MODEL MB
Service Item
Daily
25
Hours
50
Hours
100
Hours Yearly
Ref.
Page
Check Engine Crankcase Oil Level
x2-3
Check/Clean Engine Air Cooling System*
x3-27
Clean Grass Buildup Under Deck
x3-28
Service Mower Blades
x3-13
Check Security of Air Cleaner System
x3-12
Lubricate Grease Fittings and Oil Points*
x2-15
Check Transaxle Fluid
x2-12
Check Tire Pressure
x3-12
Check Drive Belts (Engine, PTO, Ground Drive)
x3-14
Check PTO and Deck Gearbox Oil Seals
x3-15
Inspect Air Filter Paper Element*
x3-27
Clean and Re-Oil Air Filter Foam Element
x3-27
Change Engine Crankcase Oil**
x2-5
Change Engine Oil Filter
x2-5
Check Security of Drive Tire
Mounting Nuts (75-85 ft-lbs.)
x3-13
Clean Transaxle Cooling Fins
x3-31
Replace Fuel Filter
x4-24
More often in extremely dusty or dirty conditions
∗∗ Change engine oil and filter after first 8 hours
of operation of a new engine (break-in period)
CAUTION
Maintenance procedures requiring special training or
tools should be performed by a trained technician.
CAUTION
When performing maintenance with the
mower body raised, a safety prop should
be installed from back of body to chassis
frame (fail-safe protection in case of fail-
ure of body lift support).

Table of Contents

Related product manuals