Walker WPS3221FHDBK - Sound Settings Menu; Audio Output and Enhancement; Advanced Sound Controls; Network Configuration Menu

English-19-
Sound Menu Content
Dolby Audio
Smart,Movie,Music,NewsandOffoptionswillbeavailable.SetasOfftodisable.
Note: Some items in Sound menu will be grayed out and unavailable if set to an option other than Off.
Surround Sound
SurroundSoundmodecanbechangedasOnorOff.
Sound Output
Setsthe soundoutput preference.TV, S/PDIF,HDMI ARC, Headphone Only and
Lineout optionswillbeavailable.Therewillbenosoundoutputexceptthroughthe
selectedoptionandtheheadphonejack.
WhenyouconnectanexternalamplifiertoyourTVusingtheheadphonejack,youcan
selectthisoptionasLineout.IfyouhaveconnectedheadphonestotheTV,setthis
optionasHeadphone Only.Pleaseensurebeforeusingheadphonesthatthismenu
itemissettoHeadphone Only.IfitissettoLineout,theoutputfromtheheadphone
socketwillbesettomaximumwhichcoulddamageyourhearing.
IfHDMI ARCoptionisselected,CEC featurewillbeenabled.
Note: Depending on the selected option some items in Sound menu will appear as grayed out and will be
unavailable.
AVL (Automatic
Volume Limiting)
Setsthesoundtoobtainfixedoutputlevelbetweenprogrammes.
IftheDolby AudiomenuitemissettoanoptionotherthanOfftheAVLsettingoptions
willchange.Auto,Night,NormalandOff optionswillbeavailable.InAutomodethe
TVwillswitchtoNormalorNightmodeautomaticallyaccordingtothecurrenttime
information.IfnotimeinformationisavailablethisoptionwillalwaysfunctionasNormal.
WhentheTVswitchestoNightmodeforthefirsttimeaftersettingthisoptionasAuto,
aninformationbarwillpopuponthescreen.
PleasenotethatcomparedtoNormalmodeNightmodeprovidesmoreaggressive
dynamiccompressioncontrolwhichissuitableforsilentenvironments.
Advanced Settings
Equalizer
Selectstheequalizermode.CustomsettingscanbemadeonlywheninUsermode.
Dynamic Bass
EnablesordisablestheDynamicBass.
Sound Mode
Youcanselectasoundmode(Iftheviewedchannelsupports).
Digital Out
Setsdigitaloutaudiotype.
Headphone
Setsheadphonevolume.ThisoptionwillnotbeavailableiftheSound Output option
issetasLineout.
Pleaseensurebeforeusingheadphonesthattheheadphone volumeissettoalow
level,topreventdamagetoyourhearing.
Balance
Setssoundbalance.ThisfeaturewillbeactivatedifSound Outputoptionissetas
TVorHeadphone Only.BalanceitemadjuststhebalanceleveloftheTVspeakers
andheadphonetogether.
Reset
Resetssomeofthesoundsettingstofactorydefaults.
English-20-
Network Menu Content
Network Type
Disablethenetworkconnectionorchangetheconnectiontype.
Scan Wireless
Networks
Startasearchforwirelessnetworks.ThisoptionwillbeavailableiftheNetwork Type
issetasWireless Device.
Press WPS on your
wifi router
Ifyourmodem/routerdevicehasWPS,youcandirectlyconnecttoitusingthisoption.
Highlightthisoption andpressOK. Go toyourmodem/router deviceandpressthe
WPSbuttononittomaketheconnection.ThisoptionwillbeavailableiftheNetwork
TypeissetasWireless Device.
Internet Speed Test
Startaspeedtesttocheckyourconnectionbandwidth.Theresultwillbedisplayedon
thescreenwhenfinished.
Advanced Settings
ChangetheIPandDNSconfigurationsofyourTV.
Networked Standby
Mode
EnableordisablethisfeaturebysettingitasOnorOff.
Note: For detailed information on the options of this menu refer to the Connectivity section.
Installation Menu Content
Automatic channel
scan (Retune)
Displaysautomatictuningoptions.D. Aerial:SearchesandstoresaerialDVBstations.
D. Cable:SearchesandstorescableDVBstations.Analogue:Searchesandstores
analoguestations.Satellte:Searchesandstoressatelltestatons.
Manual channel
scan
Thisfeaturecanbeusedfordirectbroadcastentry.
Network channel
scan
Searchesforthelinkedchannelsinthebroadcastsystem.D. Aerial:Searchesforaerial
networkchannels.D. Cable: Searchesforcablenetworkchannels.Satellite: Searches
forsatellitenetworkchannels.
Analogue fine tune
Youcanusethissettingforfinetuninganaloguechannels.Thisfeatureisnotavailable
ifnoanaloguechannelsarestoredandifcurrentlywatchedchannelisnotananalogue
channel.
Satellite Settings
Displayssatellitesettings. Satellite list:Displaysavailable satellites.Youcan Add,
DeletesatellitesorEditsatellitesettingsonthelist.Antenna installation:Youcan
changesatelliteantennasettingsand/orstartasatellitescan.Satellite Channel Table:
Youcanuploadordownloadsatellitechanneltabledatausingtherelatedoptions.
Installation Settings
(optional)
Displaysinstallationsettingsmenu.Standby Mode Search (*): YourTVwillsearchfor
newormissingchannelswhileinstandby.Anynewfoundbroadcastswillbeshown.
Dynamic Channel Update(*):If this optionis set asEnabled, thechanges on the
broadcastssuchasfrequency,channelname,subtitlelanguageetc.,willbeapplied
automaticallywhilewatching.
(*) Availability depends on model.
Clear Service List
Usethissettingtoclearchannelsstored.ThissettingisvisibleonlywhentheCountry
optionissettoDenmark,Sweden,NorwayorFinland.
Select Active
Network
Thissettingallowsyoutoselectonlythebroadcastswithintheselectednetworktobe
listedinthechannellist.ThisfeatureisavailableonlyforthecountryoptionofNorway.
Signal Information
Youcanusethismenuitemtomonitorsignalrelatedinformationsuchassignallevel/
quality,networknameetcforavailablefrequencies.
First time installation
Deletesallstoredchannelsandsettings,resetsTVtofactorysettings.