3
(888) 253-0777
Quick Start Guide
1. Set up wheelchair length (p.9), height (p.10), and width (p.10)
2. Attach Leg Rings to wheelchair (p.11-12)
3. Put on Front Harness on dog (p.13)
4. Put dog in wheelchair:
Now that your dog is wearing the front harness, he/she is ready to
get started. The wheelchair should be positioned with extenders on
the ground. Get behind the wheelchair, li back legs up, and place
dogs legs into the leg rings. When the legs are through the rings,
pull up extenders (side bars). Slide each extender through the
D-Ring on the front harness, and clip in place.
Video:
www.walkinpets.com/
all-sizes-dog-wheelchair-instructional-videos
5. How to fit dog (adjustments p.15)
Tips for adjusting length and width while dog is in wheelchair:
Rear toe pads just touch ground
Side extenders do not go past front leg
Rear width is same as chest width
Diva
To Next Page
Loading...