Walkin’ Pets Large - Parts of the Walkin Wheels Rear Large Wheelchair

4
www.WalkinPets.com
Parts of the Walkin’ Wheels
®
Rear Large Wheelchair
Aluminum
wheelchair frame; Width
Connector installed
Knuckle
(attached to frame)
One Belly Belt for
mid-section support
(use if needed)
Width Connectors.
The 9" connector is
installed in the frame
Tool kit with Allen wrench
and cup screws for noise
reduction (use if desired)
Stirrups to keep feet from
dragging (use if needed)
Length Extenders.
The 26" extenders are
installed in the frame
Leg Rings for
rear support
Front Harness with
comfort sleeves,
fully adjustable
Wheels attached to Struts
(one set for each wheelchair)
12" and 16" shown here
12"
16"