Wallbox Commander 2 - Page 51

DE
1. Configure the dynamic power sharing functionality only on the Primary charger after powering up the system.
2. The Primary charger can be configured from the Wallbox app or touchscreen interface for Commander family
chargers.
3. A standard or business account is needed to configure this functionality. For more information see the
corresponding charger’s User Guide. The chargers will stay in Unconfigured status until the Primary is properly
configured.
Network Configuration
PT
1. Configure the dynamic power sharing functionality only on the Primary charger after powering up the system.
2. The Primary charger can be configured from the Wallbox app or touchscreen interface for Commander family
chargers.
3. A standard or business account is needed to configure this functionality. For more information see the
corresponding charger’s User Guide. The chargers will stay in Unconfigured status until the Primary is properly
configured.
Network Configuration
NL
1. Configure the dynamic power sharing functionality only on the Primary charger after powering up the system.
2. The Primary charger can be configured from the Wallbox app or touchscreen interface for Commander family
chargers.
3. A standard or business account is needed to configure this functionality. For more information see the
corresponding charger’s User Guide. The chargers will stay in Unconfigured status until the Primary is properly
configured.
Network Configuration
SV
1. Configure the dynamic power sharing functionality only on the Primary charger after powering up the system.
2. The Primary charger can be configured from the Wallbox app or touchscreen interface for Commander family
chargers.
3. A standard or business account is needed to configure this functionality. For more information see the
corresponding charger’s User Guide. The chargers will stay in Unconfigured status until the Primary is properly
configured.
Network Configuration
FR
1. Configure the dynamic power sharing functionality only on the Primary charger after powering up the system.
2. The Primary charger can be configured from the Wallbox app or touchscreen interface for Commander family
chargers.
3. A standard or business account is needed to configure this functionality. For more information see the
corresponding charger’s User Guide. The chargers will stay in Unconfigured status until the Primary is properly
configured.
Network Configuration
CA
1. Configure the dynamic power sharing functionality only on the Primary charger after powering up the system.
2. The Primary charger can be configured from the Wallbox app or touchscreen interface for Commander family
chargers.
3. A standard or business account is needed to configure this functionality. For more information see the
corresponding charger’s User Guide. The chargers will stay in Unconfigured status until the Primary is properly
configured.
Network Configuration
IT
1. Configure the dynamic power sharing functionality only on the Primary charger after powering up the system.
2. The Primary charger can be configured from the Wallbox app or touchscreen interface for Commander family
chargers.
3. A standard or business account is needed to configure this functionality. For more information see the
corresponding charger’s User Guide. The chargers will stay in Unconfigured status until the Primary is properly
configured.
Network Configuration
ES
1. Configure the dynamic power sharing functionality only on the Primary charger after powering up the system.
2. The Primary charger can be configured from the Wallbox app or touchscreen interface for Commander family
chargers.
3. A standard or business account is needed to configure this functionality. For more information see the
corresponding charger’s User Guide. The chargers will stay in Unconfigured status until the Primary is properly
configured.
Network Configuration
NO
1. Configure the dynamic power sharing functionality only on the Primary charger after powering up the system.
2. The Primary charger can be configured from the Wallbox app or touchscreen interface for Commander family
chargers.
3. A standard or business account is needed to configure this functionality. For more information see the
corresponding charger’s User Guide. The chargers will stay in Unconfigured status until the Primary is properly
configured.
Network Configuration