Wallbox PULSAR - Primary Charger Configuration; Number of Chargers; Maximum Current Per Phase; Mains Breaker Maximum Current

Primary Charger
Configuration
Number of Chargers:
Input the number of chargers including
the Primary charger
Maximum current per phase:
It is the maximum current that can be
supplied to the charging network. This
value is usually the rated current of the
MCB
Minimum current per charger:
From 6 A to 10 A. The default value
is 6 A
Mains Breaker Maximum current:
The maximum current that can
be supplied to the electrical installation.
This value is the rated current of the
mains circuit breaker that protects the
electrical installation.
1.
2.
3.
4.