DE
1. Number of Chargers: Input the number of chargers including the Primary charger
2. Maximum current per phase: It is the maximum current that can be supplied to the charging network
This value is usually the rated current of the MCB.
3. Minimum current per charger: From 6 A to 10 A. The default value is 6 A
4. The maximum current that can be supplied to the electrical installation.
This value is the rated current of the mains circuit breaker that protects the electrical installation..
Primary Charger Configuration
PT
1. Number of Chargers: Input the number of chargers including the Primary charger
2. Maximum current per phase: It is the maximum current that can be supplied to the charging network
This value is usually the rated current of the MCB.
3. Minimum current per charger: From 6 A to 10 A. The default value is 6 A
4. The maximum current that can be supplied to the electrical installation.
This value is the rated current of the mains circuit breaker that protects the electrical installation..
Primary Charger Configuration
NL
1. Number of Chargers: Input the number of chargers including the Primary charger
2. Maximum current per phase: It is the maximum current that can be supplied to the charging network
This value is usually the rated current of the MCB.
3. Minimum current per charger: From 6 A to 10 A. The default value is 6 A
4. The maximum current that can be supplied to the electrical installation.
This value is the rated current of the mains circuit breaker that protects the electrical installation..
Primary Charger Configuration
SV
1. Number of Chargers: Input the number of chargers including the Primary charger
2. Maximum current per phase: It is the maximum current that can be supplied to the charging network
This value is usually the rated current of the MCB.
3. Minimum current per charger: From 6 A to 10 A. The default value is 6 A
4. The maximum current that can be supplied to the electrical installation.
This value is the rated current of the mains circuit breaker that protects the electrical installation..
Primary Charger Configuration
FR
1. Number of Chargers: Input the number of chargers including the Primary charger
2. Maximum current per phase: It is the maximum current that can be supplied to the charging network
This value is usually the rated current of the MCB.
3. Minimum current per charger: From 6 A to 10 A. The default value is 6 A
4. The maximum current that can be supplied to the electrical installation.
This value is the rated current of the mains circuit breaker that protects the electrical installation..
Primary Charger Configuration
CA
1. Number of Chargers: Input the number of chargers including the Primary charger
2. Maximum current per phase: It is the maximum current that can be supplied to the charging network
This value is usually the rated current of the MCB.
3. Minimum current per charger: From 6 A to 10 A. The default value is 6 A
4. The maximum current that can be supplied to the electrical installation.
This value is the rated current of the mains circuit breaker that protects the electrical installation..
Primary Charger Configuration
IT
1. Number of Chargers: Input the number of chargers including the Primary charger
2. Maximum current per phase: It is the maximum current that can be supplied to the charging network
This value is usually the rated current of the MCB.
3. Minimum current per charger: From 6 A to 10 A. The default value is 6 A
4. The maximum current that can be supplied to the electrical installation.
This value is the rated current of the mains circuit breaker that protects the electrical installation..
Primary Charger Configuration
ES
1. Number of Chargers: Input the number of chargers including the Primary charger
2. Maximum current per phase: It is the maximum current that can be supplied to the charging network
This value is usually the rated current of the MCB.
3. Minimum current per charger: From 6 A to 10 A. The default value is 6 A
4. The maximum current that can be supplied to the electrical installation.
This value is the rated current of the mains circuit breaker that protects the electrical installation..
Primary Charger Configuration
NO
1. Number of Chargers: Input the number of chargers including the Primary charger
2. Maximum current per phase: It is the maximum current that can be supplied to the charging network
This value is usually the rated current of the MCB.
3. Minimum current per charger: From 6 A to 10 A. The default value is 6 A
4. The maximum current that can be supplied to the electrical installation.
This value is the rated current of the mains circuit breaker that protects the electrical installation..
Primary Charger Configuration
To Next Page
Loading...
