Safety Signs
WE225, WE235
Trailer Wood Splitter
Safety
16
4. Warning!
Always wear appropriate Personal Protective Equipment
when using this machine. For example:
• A hard hat
• Heavy gloves
• Hearing protection
• Protective shoes with slip resistant soles
• Protective glasses, goggles or face shield
3.3 Replacing Damaged Safety
Signs
1. Keep safety signs clean and legible at all times.
2. Replace safety signs that are missing or have
become illegible.
3. Parts that were replaced with a safety decal on them
must also have the safety sign replaced.
4. Replacement safety signs are available from your
authorized Distributor or Dealer Parts Department or
the factory.
3.3.1 How to Install Safety Signs
Ambient temperature must be above 50 °F (10 °C) to
install decals.
1. Clean and dry the installation area.
2. Determine exact position before removing the backing
paper.
3. Peel back the corner of the backing paper.
4. Align the sign over the specied area and carefully
press the small portion with the exposed sticky
backing in place.
5. Slowly peel back the remaining paper and carefully
smooth the remaining portion of the sign in place.
6. Small air pockets can be pierced with a pin and
smoothed out using the piece of sign backing paper.
To Next Page
Loading...
