Wallenstein WX370 - 4 Familiarization; To the New Operator

WX370
3-point Hitch Wood Splitter
Familiarization
15
4. Familiarization
4.1 To the New Operator
It is the responsibility of the owner or operator to
read this manual and to train all other operators
before they start working with the machine. Follow
all safety instructions exactly.
By following recommended procedures, a safe
working environment is provided for the operator,
bystanders and the area around the work site.
Untrained operators are not qualied to use the
machine.
Many features incorporated into this machine are
the result of suggestions made by customers like
you. Read this manual carefully to learn how to use
the machine safely and provide maximum operating
efciency. By following the instructions in conjunction
with a good maintenance program, your wood splitter
can provide many years of trouble-free service.
IMPORTANT! Make sure all operators
understand how to put the wood splitter in a Safe
Condition before working with this machine. See
Safe Condition page 9.
4.1.1 Training
Each operator must be trained in the proper set-up and
operating procedures before using the machine.
1. Move the unit to a large open area to allow the
operator to become familiar with control functions
and machine response.
2. Do not allow untrained operators to use the
machine. They can endanger themselves and
others, or damage property and the machine.
4.1.2 Job Site Familiarization
It is the responsibility of the operator to be thoroughly
familiar with the work site prior to starting.
1. Avoid close or cramped work spaces. Be sure
there is sufcient space and clearance for the
machine to operate.
2. Organize the working area to minimize movement.
3. Position the machine so prevailing winds blow
engine exhaust fumes away from you.