FACE BVBA • HOEK 76 - UNIT 301 - 2850 BOOM • +32 3 844 67 97 • H.R. ANTWERPEN 291868 • VAT/TVA/BTW 0448 180 481 • INFO@FACE-BE.EU
WALRUS AUDIO MELEE: Wall of Noise (Reverb/Distortion)
• Item: 63855
• EAN: 810424034488
• Packaging Dimensions: 15.2 x 11.4 x 8.9 cm
• Weight: 0.46 kg
• Pictures | Translations | User Manual
Need to know for Retailers
• Unique High-Gain Distortion and Reverb combo
• Joystick control to meld reverb and distortion into one massive blaze of sound
• Run distortion into reverb or reverb into distortion with the D>R / R>D toggle
• 3 different reverb programs:
o Ambient Reverb
o Octave Down Reverb (like SLÖ Dark mode)
o Reverse Reverb with Feedback
• “Less is more” approach when it comes to controls – focus on fun & creative output
• Joystick controls distortion level (y-axis) and reverb mix (x-axis)
Full Feature List
• High-Gain Distortion and Reverb combo
• Controls: Vol, Tone, Decay, D>R|R>D (determines order of effects), Joystick (distortion level + reverb
mix), bypass, sustain switch
• Joystick control to meld reverb and distortion and inspire a wealth of creative output
• Joystick controls reverb mix (x-axis) and distortion level (y-axis)
• Switch signal-chain-order of distortion- and reverb-effect
• D>R (distortion into reverb) or R>D (reverb into distortion)
• D>R mode: traditional set up. Notes and chords remain their clarity
• R>D mode: notes and chords are muddied to create a wall of sound
• 3 different reverb programs: Ambient, Octave and Reverse
• Ambient Reverb: Huge reverb with massive trails
• Octave Reverb: Lower octave on reverb trail. Like “Dark” mode on Walrus Audio Slö.
• Reverse Reverb with Feedback: Add reversed reverb trails or push into reverse feedback overload.
• Tone 3-way-toggle-switch sets the tone of reverb and distortion: normal, dark, bright
• Decay 3-way-toggle-switch sets time of the reverb: minimum, medium, maximum
• Set modulation via secondary control (decay 3-way-switch): none, slight (33RPM), high (45RPM)
• Use momentary bypass to create a moment of texture
• Sustain switch ramps up reverb trail to maximum or latches current reverb decay
• 3 bypass modes: DSP bypass, DSP+ true bypass, true bypass
• 9-volt DC, Center Negative, 200mA minimum
• Power Supply not included
• Designed and assembled in the USA
To Next Page
Need help?
General
