Walvoil SD5 - Page 38

NOTE (*) -- Codes are referred to UN-UNF threads.
8ES solenoid control
Complete controls
Solenoid direct control with spring return to neutral position.
It needs special spools and standard body (body kit without seals on spool).
1.
2.
SD5 / 1 -- P (JG3--120) / 1 8ES3 / AET -- SAE -- 24VDC
Description example:
1. 2.
8ES3
8ES1
3. 4.
4.
8ES3
8ES2
8ES1
8ES2
4.
2. Spool options
TYPE CODE DESCRIPTION
1(ES) 3CU1210011 Double acting, 3 positions, with A and B
closed in neutral position
2(ES) 3CU1225010 Double acting, 3 positions, with A and B
open to tank in neutral position
3. Control kit
TYPE CODE DESCRIPTION
8ES1 5V08024 Single acting P®A, with spring return to
neutral position
8ES2 5V08024 Single acting P®B, with spring return to
neutral position
8ES3 5V08025 Double acting,withspringreturntoneutral
position
4. Coil
TYPE CODE DESCRIPTION
10.5VDC 4SOL512011 Nominal voltage 10.5VDC
12VDC 4SOL512012 Nominal voltage 12VDC
24VDC 4SOL512024 Nominal voltage 24VDC
1. Body kit *
TYPE CODE DESCRIPTION
SD5/1--P 5KC1193100 1 section
SD5/2--P 5KC1223100 2 sections
SD5/3--P 5KC1243100 3 sections
SD5/4--P 5KC1273100 4 sections
SD5/5--P 5KC1313100 5 sections
SD5/6--P 5KC1353100 6 sections
SD5/7--P 5KC3E3100 7 sections
I
I ”A” and “B” ports plugs *
TYPE CODE DESCRIPTION
SAE6 3XTAP817130 For single acting controls type 8ES1 and
8ES2
3.
3.
3.
3.
SD5
38 DAT003A