4.0 INFORMATION REGARDING HANDLING
AND TRANSPORT
VL
2
VAL.130.--.M.EN Issue: A1
09.16
18
Harness the packages according to the indications and symbols applied on them.
8QORDGWKHSDFNDJHVIURPWKHPHDQVRIWUDQVSRUWDQGSODFHWKHPRQDÀDWVXUIDFHZKLFKFDQHQVXUHWKHVWD-
bility.
Avoid any kind of damage to the goods during unloading and handling. Always handle them with care.
4.3 Lifting and unloading methods
Danger - Warning
Carry out the lifting and handling operations according to the information indicated on the valve and in
the Manufacturer’s Operation Manual.
The person authorized for unloading operations has to make sure all the necessary measures are adopt-
ed to ensure his or her safety and the safety of other persons directly involved.
Use means and accessories (ropes, hooks, shackles etc.) suitable for the load to be lifted.
Pay attention in the lifting phase to balance the load to avoid uncontrolled movements which could
cause work injuries to persons.
Do not stack the packages as they are not sized for that purpose.
Do not drag or push the equipment as this will damage it.
Before lifting and handling the load, read the relevant information indicated in the ³Information regarding
safety´ Chapter.
To Next Page
Loading...
Need help?
General
