WAMGROUP SBB-HFF - Exclusion of Responsibility

SBB-HFF
1.0 GENERAL INFORMATION
2
EXT.SBB-HFF.--.M.A.0219.EN Issue: A
02.19
7
The equipment is delivered according to the specications indicated by the Buyer in the order and the condi-
tions valid at the time of purchase.
The Manufacturer shall not accept responsibility for safety of persons or objects and operation failure of the
equipment if the loading/unloading operations from trucks, transport, positioning at the site, use, repairs, main-
tenance etc. have not been carried out in compliance with the warnings described in this Manual, and in ac-
cordance with the national legislation in force.
Likewise, the Manufacturer shall not accept any responsibility if the equipment concerned is used:
- improperly;
- by unauthorized persons and/or persons not su󰀩ciently trained for installation, operation and maintenance;
- with modications made to the original conguration without the Manufacturer’s permission;
- with spare parts that are not original or are not specic for the model;
- without maintenance;
- non-pursuant to the regulatory standards and national or local legislation on the matter of occupational
safety;
- non-pursuant to the recommendations in this Manual or on the warning and danger plates applied on the
equipment.
1.7 Exclusion of responsibility