SBB-HFF
8.0 REPLACEMENT OF PARTS
50
2
EXT.SBB-HFF.--.M.A.0219.EN Issue: A
02.19
8.1 Safety recommendations for replacement
Danger - Warning
The replacement operations must be carried out by a specialist authorized technician with specic
skills in the sector concerned (mechanical, electrical etc).
Before carrying out any operation, provide suitable safety measures and use the appropriate equip-
ment to prevent risk of work injuries to persons involved in the operations and those nearby.
Activate all the safety devices envisaged and prevent access to controls which, if activated, could
cause work injuries to the persons involved in the operations.
Danger - Warning
Set the equipment in safety condition (see Glossary and terminology).
8.3 Dismantling and disposal
Dismantling of the equipment (machine) must be entrusted to personnel specialized in these activities and
equipped with adequate skills.
Dismantle the components of the equipment (machine) concerned; if necessary contact the Manufacturer for
further information.
The components dismantled have to be separated on the basis of the nature of the materials of which they
consist, in compliance with the laws on the matter of “dierential collection and disposal of wastes”.
With reference to the WEEE Directives, electrical and electronic components, marked with a special symbol,
have to be disposed o in authorized collection centres meant for the purpose.
Unauthorized disposal of “Waste Electrical and Electronic Equipment” (WEEE) is punishable with nes gov-
erned by the laws concerning the matter.
8.2 Returning the equipment (the machine)
When returning the equipment (machine) use the original packaging if it has been preserved, otherwise x the
it on a pallet and cover it with nylon shrink-wrap, to protect it as best as possible from impact during transport.
In any event, make sure there is no residue material inside the equipment (machine).
To Next Page
Loading...