WAMGROUP SBB-HFF - Manufacturers Data and Identification of Equipment

SBB-HFF
1.0 GENERAL INFORMATION
2
EXT.SBB-HFF.--.M.A.0219.EN Issue: A
02.19
5
Important
Do not change the data on the identication plate.
Keep the ID plates clean, intact and legible as regards the data they contain.
If the ID plate is damaged or is no longer legible (even just one informative element on it) contact the
Manufacturer for a new ID plate and replace it.
The ID plates shown identify the equipment concerned and its main components.
The plates show the reference necessary for operating safety.
1.4 Manufacturer’s data and identication of equipment
1 - Identication Cross plate
A) Manufacturer’s name and address
B) Cross type
C) Cross weight
D) Serial No.
E) Year of manufacture
F) Max. load Cross
D
B
C
E
A
Year
TYPE:
Serial N0.:
WAM S.p.A. via Cavour 338-Ponte Motta / Cavezzo (MO) - ITALY
WAMGROUP
COD: 063001702
Kg
F