WAMGROUP SBB-HFF - Noise Level; Environmental Operating Limits; Overall Dimensions and Technical Features

3.0 TECHNICAL INFORMATION
2
EXT.SBB-HFF.--.M.A.0219.EN Issue: A
02.19
18
SBB-HFF
3.6 Noise level
The noise level values, expressed in dB(A) are obtained from readings made in an open eld, at maximum
performance, on 4 cardinal points at a distance of 1.5 metres from the equipment.
The values obtained are: max. 75 dB(A).
The user may obtain values di󰀨erent from those indicated depending on the environment in which the equip-
ment is installed.
It is therefore advisable to avoid installing the equipment near corners, walls and boxed metal structures.
The noise values refer to the machine complete with accessories, if any.
Danger - Warning
Depending on the installation site, the installer must adopt suitable systems (barriers, etc.), if neces-
sary, to maintain the noise levels within the limits permitted by law.
3.7 Environmental operating limits
Unless otherwise specied, the equipment concerned may be used only within the limits indicated.
- Altitude: less than 1,000 m at sea level
- Environmental temperature: between - 10 °C and + 40 °C
The FIBC Dischargers (SBB) are designed and constructed for carrying out their function in compliance with
the following limits of use:
Maximum operating temperature:
+40°C in continuous mode
Minimum operating temperature:
-20°C
Height of FIBC:
- Min. 600mm
- Max. 2000mm (for models S and M)
- Any (for model C)
3.8 Overall dimensions and technical features
For an exact identication of the equipment concerned, see the identication plate.
The shipping documents indicate the Serial number and identication codes.
The information regarding the technical features of the equipment, is given in Chapter 6 of Technical Manual.