Why does W&H Laboratory Equipment chamber door lock and reopen immediately?
If, when starting a cycle, the chamber door locks but re-opens immediately and the 'Open the door' message appears on your W&H Laboratory Equipment, make sure the door seal is evenly inserted on the entire circumference. Also, remove any objects interfering with the chamber door and ensure the door isn't forced against the load or chamber furniture.
What to do if W&H Laboratory Equipment is leaking water at the front?
If you see water leaking at the front of the W&H sterilizer, it could be due to leaks through the chamber door seal. Try cleaning or replacing the door seal and cleaning the chamber face side. If the leak persists, it might be an internal leak, and you should call technical service.
General| Brand | W&H |
|---|---|
| Model | Lisa VA131-22 |
| Category | Laboratory Equipment |
| Language | English |
Highlights critical safety warnings related to thermal, electrical, and operational risks.
Defines the responsibilities of the user and the manufacturer for safe operation.
Guides on location requirements, electrical, water, and network connections.
Explains basic operation, power control, and homepage elements.
Covers adding, deleting users, and managing PINs for administrative control.
Instructions for conducting Bowie/Dick, Helix, and Vacuum tests for performance validation.
Guides on running, scheduling, stopping, and managing sterilization cycles.
Details feed water specifications and validation recommendations.
To Next Page
