Wansview NCM620W - Page 10

http://www.wansview.com
10
Figure 3
Notice: Need to download ActiveX when first use, click “download ActiveX( when first
use)” in figure 3, will display prompt as figure 4, click ‘run’ will download and install the
ActiveX automatically.
Figure 4
Tips: You can hold on reset button on the camera for 10 seconds to restore factory
default if you forget user name and password, or not sure the device parameters.
 Click “Video View” in figure 3 to access video interface as below.
1) Status bar
Figure 4-1
1 Display connection status;
2 Display record status: if click “Record”, it will show “REC” which stands for