Wansview NCM620W - System Setting

http://www.wansview.com
24
identify it.
3.4.6. Multiple settings
Click SYSTEM SET->>ADVANCED->>Multiple Settings to access it.
Figure 26
Please set multiple devices here first to view 4 or 9 split screen at chapter 3.1 browse
interface.
3.5. System setting
3.5.1. Device information
Click SYSTEM SET->>SYSTEM->>Device Information to access it.
Figure 27
SD status shows the free capacity if SD card is installed.
Notice: the device supports max 32G SD card. Please format the SD card to FAT32
before use the card on camera. Please check if the SD Card matches the camera or not
before purchasing the SD Card.