2. Installation and Operation Guide
2.1. View video by mobile phone software
You need to download and install iSmartviewPro mobile phone client software from
attached CD, and then scan QR code on the camera body to add camera for viewing video, for
detail, please see “Product Quick Application Guide”.
2.2. View video by wired connection in LAN
Power on the IP camera（please check carefully the voltage of power adaptor, don’t
insert incorrect power, otherwise it will be damaged）, connect IP camera to router by
network cable and connect computer to the same router, example of figure 1.
Figure 1
Insert attached CD to computer driver, double click “H&MSearch_en.exe” in the CD,
will pop up the interface as figure 2, please operate as the following steps:
To Next Page
Loading...
