Wansview NCM620W - Page 13

http://www.wansview.com
13
Figure 6
For example: operation step of port forwarding as figure 7.
Figure 7
1) Please go to the setting interface of Router, and choose “Port Forwarding”;
2) Choose “Add custom Service” ;
3) Input IP camera http port;
4) Input LAN IP Address of the camera, click “Apply” (port number and IP address as
you set in figure 2）
After finishing the port forwarding, you can use WAN IP address of router and http port of
IP camera
Computer
Computer
Router
ADSL
Internet
IOS
Android