Item no. 43.99990.BA-EN07 / 27.09.19
22/36
Shelving systems with two uprights and one back panel
5.13 Installing a shelf
5.13.1 Installation instructions
5.13.2 Shelf pre-assembly
• Ensure that the load is evenly distributed
over the entire shelf (surface load).
• The shelves must be locked in place in
the consoles.
• A shelf may only be placed obliquely
if a goods stop (front panel) is installed
that can support the load.
Fig. 57
Fig. 58
Fig. 59
Fig. 60
► Press the console in the middle until
it clicks into place on the flat bars
of the shelf.
Fig. 61
To Next Page
Loading...