Item no. 43.99990.BA-EN07 / 27.09.19
5/36
Safety
2.3 Warnings and safety instructions
WARNING! The product may tip or break if loaded unevenly, overloaded or used
improperly.
The result: Breakage of the product and risk of injury to persons and/or damage
to property.
► Only place the product on a firm, even and level surface.
► Ensure that the existing floor is able to support the surface pressure exerted by the
product.
► Use fastening material that is appropriate for the walls.
► Use longer screws and spacer sleeves for deeper-seated concrete layers.
► Only load the product evenly, not just on one side.
► Do not overload the product.
► Only use the product as intended.
► Do not continue to use a defective product. If necessary, have it repaired.
► Ensure that there is no danger or risk of injury to persons.
WARNING! If using a top frame or gondola end shelf, the product may tip or break if load-
ed haphazardly.
The result: breakage of the product and risk of injury to persons and/or damage
to property.
► Always load the gondola axis first and only then the shelves of the top frame or end
shelves.
► First empty the shelf at the top frame or end shelves and then the gondola axis.
► A load >the total load of the loaded shelves of the top frame or end shelves must be
applied in the gondola axis (equilibrium).
WARNING! There is a risk of injury when installing or setting up the product.
The result: injury to hands or feet due to crushing or shearing.
► Note the risk of injury to hands and feet when installing or setting up the product.
► Only have the product installed by trained and qualified staff.
► Install the shelving system with the assistance of a second person.
►
Be aware of the risk of injuries from parts that may tip over during the installation
.
► Wear safety gloves during the installation.
► Wear safety goggles during drilling work.
To Next Page
Loading...