Warmup PT502 User Manual

Installation & Operating Instructions
Model PT502 Model PT503 Model PT504
Your new electronic thermostat is
equipped with a microprocessor.
Depending on the selected mode, this
thermostat has been designed to
control:
A: Ambient temperature
F: Floor temperature (floor heating)
The ON/OFF button should be pressed
once to turn off the thermostat. The
thermostat is now in sleep or standby
mode.
HIGH
LOW
There are 4 available setpoints to identify
and select your comfort temperature
Your new electronic timer is
equipped with a microprocessor.
Depending on the selected time,
this timer has been designed to
control the temperature as
follows:
This timer is an electronic timing device, with
preset temperature control, which allows the
heating to be switched over a pre-programmed
period.
This device has 4 programmes:
Manual – the heating will be manually controlled
by a preset comfort level setting
P1
•Turn on at desired time
•Heat for 3.5 hrs
•Off for 8 hrs
•Heat for 5.5 hrs
•Off for 7 hrs
•The cycle is then repeated
P2
•Heat is on for 3 hrs
•Off for 21 hrs
•The cycle is then repeated
P3
•Heat for 3 hrs
•Off for 9 hrs
•Heat for 3 hrs
•Off for 9 hrs
•The cycle is then repeated
Heating On
Prog
Time
5am 5pm
6am 6pm
7am 7pm
12am 12pm
Model Information
Setpoint Definition
Technical Specifications
Electrical rating: 230-240V, ac 50 Hz
Load:15A resistive
Warranty: Two (2) year
Temperature control settings
Comfort: 20 C – 28 C
Backup: 5 C
Electrical rating: 230-240V, ac 50 Hz
Load:15A resistive
Warranty:Two (2) year
Temperature control settings
Comfort: 20 C – 28 C
Backup: 5 C – 16 C
Electrical rating: 230-240V, ac 50 Hz
Load:15A resistive
Warranty:Two (2) year
HEAT
To set 2 hour/4 hour/ 6 hour mode
Press the On/Off button until the 2
hour LED light comes on.
Press the On/Off button three times
and the 4 hour LED light will come
on.
Then press the On/Off button three
times and the 6 hour LED light will
come on.
To set manual mode
Press the On/Off button and hold for
5 seconds. The Power and Man lights
will come on.
NB: The Power LED will be lit up
when the heating is on.
The ON/OFF button should be
pressed once to turn off the timer.

Warmup PT502 Specifications

General

Brand	Warmup
Model	PT502
Category	Thermostat
Language	English

Summary

Model Information and Features

PT503 Thermostat Description

Details the PT503 thermostat's microprocessor, control modes (ambient/floor), and sleep/standby mode.

PT504 Timer Description

Details the PT504 timer's microprocessor and temperature control modes (2/4/6 hour, manual).

Setpoint Definition

Comfort Temperature Setpoints

Describes the availability of 4 setpoints for identifying and selecting comfort temperatures.

Technical Specifications

Method of Operation

PT502 Timer Operation

Instructions for setting manual mode, turning off manual mode, and turning off the heating.

PT503 Thermostat Operation

Instructions for turning off the thermostat, selecting comfort temperature, and saving settings.

PT504 Timer Operation

Instructions for setting 2/4/6 hour modes and manual mode, including LED indicators.

Control Module Installation

Wiring and Connection Guidelines

Ensures safety and proper setup for electrical connections by a registered electrician.

Warranty Information

Warmup New Zealand Ltd. Two-Year Warranty

Details the two-year warranty against material/workmanship defects and exclusions.