The measured temperature is below the thermostat's display range.
Heating is activated.
The measured temperature is above the thermostat's display range. Heating
is deactivated.
Verify the thermostat and sensor connections
For more information please refer to the Warmup website :http://www.warmup.co.nz/thermostats.
Error messages – If a fault or error occurs, the thermostat will display one of the following error
messages:
Warmup New Zealand Ltd
T 0800 927 687 E info@warmup.co.nz W www.warmup.co.nz
Troubleshooting
LO
HI
Er
To Previous Page
Loading...
