Warn XT25 User Manual

WARN Industries, Inc. PN74376A1
XT25 WINCH
Part Number: 75500
Rated Line Pull: 2500 lbs. (1134 kgs)
Motor: 12V DC, 0.9 hp (0.7 kW) Permanent Magnet, Sealed
Controls: Handlebar Mounted Mini Rocker
Gear train: 3-Stage Planetary
Gear Ratio: 154:1
Clutch (Freespool): Sliding Pin and Ring Gear
Brake: Roller Disk
Drum diameter/length: 2.0"/2.9" (52mm/74mm)
Kit Shipping Weight: 24.1 lbs. (10.9 kgs)
Rope: Synthetic, Ø 3/16" x 50’ (Ø 4.8mm x 15 m)
Fairlead: Roller
Recommended Battery: 12 Amp/hr minimum
Duty Cycle: Intermittent
Battery leads: 8 gauge
Finish: Steel Grey Powder Coat
Warranty: Limited Lifetime
Mounting Bolt Pattern: 3.0" x 4.88" (76mm x 124mm)
Winch Dimensions: 13.12" L x 4.51" D x 4.69" H (33.3cm L x 11.5cm D
x 11.9cm H)
Winch Weight: 13.4 lbs. (6.1 kgs)

Warn XT25 Specifications

General

Brand	Warn
Model	XT25
Category	Winches
Language	English

Summary

XT25 WINCH Specifications

Part Number

Identifier for the XT25 WINCH product.

Rated Line Pull

Maximum load the winch can pull, specified in pounds and kilograms.

Motor Specifications

Details of the winch motor, including voltage, power, and type.

Gear Train and Ratio

Information on the winch's gear system, including stage and ratio.

Clutch and Brake Type

Specifies the mechanism for clutch engagement and brake system.

Drum Dimensions

Diameter and length of the winch drum.

Rope Details

Type, diameter, and length of the included synthetic rope.

Fairlead Type

Specifies the type of fairlead included with the winch.

Battery and Duty Cycle

Recommended battery specifications and operational duty cycle.

Winch Dimensions and Weight

Physical size and weight of the winch unit.

Performance Data

Duty Cycles

Service/Upgrade Kits

Service Instructions