T
Tammy JonesAug 2, 2025
How to secure the battery on a WARRIOR WEP8001ST Trimmer?
- Rronald90Aug 2, 2025
To ensure the battery is secure in your WARRIOR Trimmer, verify that the latches on the battery compartment snap firmly into place.
To Next PageTo Next PageHow to secure the battery on a WARRIOR WEP8001ST Trimmer?
To ensure the battery is secure in your WARRIOR Trimmer, verify that the latches on the battery compartment snap firmly into place.
What to do if WARRIOR WEP8001ST motor fails to start and LED flashes?
If the WARRIOR Trimmer's motor doesn't start when you press the switch trigger and the LED indicator flashes 1-19 times, it could be due to a motor controller fault, overheating, low battery, or the battery overheating. To resolve this: 1. Release the trigger and wait 3-5 seconds before restarting the machine. 2. If that doesn't work, stop using the trimmer and allow it to cool down, or charge the battery.
General