To Next Page
T
Tammy JonesAug 2, 2025
How to secure the battery on a WARRIOR WEP8001ST Trimmer?
- Rronald90Aug 2, 2025
To ensure the battery is secure in your WARRIOR Trimmer, verify that the latches on the battery compartment snap firmly into place.
How to secure the battery on a WARRIOR WEP8001ST Trimmer?
To ensure the battery is secure in your WARRIOR Trimmer, verify that the latches on the battery compartment snap firmly into place.
What to do if WARRIOR WEP8001ST motor fails to start and LED flashes?
If the WARRIOR Trimmer's motor doesn't start when you press the switch trigger and the LED indicator flashes 1-19 times, it could be due to a motor controller fault, overheating, low battery, or the battery overheating. To resolve this: 1. Release the trigger and wait 3-5 seconds before restarting the machine. 2. If that doesn't work, stop using the trimmer and allow it to cool down, or charge the battery.
Specifications for the brushless lithium-ion cordless string trimmer, including type, motor, and dimensions.
Identification and description of the auxiliary handle and guard.
Procedure for unpacking, inspecting parts, and identifying all included components.
Instructions for attaching the guard, trimmer head, auxiliary handle, and shoulder harness.
Procedure for starting, stopping, and replacing the trimmer line for safe operation.
Advice on effective cutting techniques and instructions for removing/attaching the string head.
Steps for charging the battery, including initial charge and LED status interpretation.
Instructions for mounting the charger and checking for charging issues.
Guidelines for cleaning plastic parts and the power head, and recommendations for proper storage.
General