6
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
The following signal words and meanings are intended to explain the levels of risk associated with
this product
SERVICE
Servicing requires extreme care and knowledge and should be performed only by a qualified service
technician. For service we suggest you return the product to your nearest AUTHORRIZED SERVICE
CENTER for repair. When servicing use only identical replacement parts.
Frequency (cycles per
second)
Type or a characteristic of current.
Do not install or use any type of blade on a
product or displaying this symbol.
Revolutions, strokes, surface speed, orbits etc.,
per minute.
Do not expose to rain or use in damp locations.
Read
the
Operator
’
s
Manual
To
reduce
the
risk
of
injury
user
must
read
and
understand operator’s manual before using this
product.
Always wear eye protection with side shields
marked to comply with ANSI Z87.1 when
operating this equipment.
Precautions that involve your safety.
Thrown objects can ricochet and result in
personal injury or property damage.
Keep all by standers at least 50ft. away.
Double-insulated construction
Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may
result in property damage.
To Next Page
Loading...
Need help?
General