Need help?Do you have a question about the Water Specialist EE and is the answer not in the manual?
Displays the time remaining in the current cycle or error codes.
Explains how to use the control buttons for various functions.
Details the duration of each cycle for different water treatment modes.
Describes the five different user interface displays for system status.
Instructions for setting the system's current time.
Covers unlocking, valve size, flow meter, and signal settings.
Details valve operation modes.
Describes settings for WS1/WS1.5 and WS2 valves.
Setup for linking the control valve to a System Controller.
Guides through initial softener setup parameters.
Configures the duration for the first four regeneration cycles.
Sets system capacity and regeneration triggers.
Configures regeneration time options and relay operations.
Specifies relay actuation and deactivation times.
Covers filter type selection and initial cycle time configurations.
Details regeneration trigger and relay operations for filters.
Entry, hardness, and day override configuration.
Setting the next regeneration time (hour and minute).
Configuration for 28-day regeneration schedule.
Setting the next regeneration time for 28-day cycle.
Configuration for 7-day regeneration schedule.
Setting the next regeneration time for 7-day cycle.
Accessing diagnostics and viewing software version.
Displays volume, days, regenerations, and error logs.
Shows historical usage, capacity, and MAV drive data.
Displays the time remaining in the current cycle or error codes.
Explains how to use the control buttons for various functions.
Details the duration of each cycle for different water treatment modes.
Describes the five different user interface displays for system status.
Instructions for setting the system's current time.
Covers unlocking, valve size, flow meter, and signal settings.
Details valve operation modes.
Describes settings for WS1/WS1.5 and WS2 valves.
Setup for linking the control valve to a System Controller.
Guides through initial softener setup parameters.
Configures the duration for the first four regeneration cycles.
Sets system capacity and regeneration triggers.
Configures regeneration time options and relay operations.
Specifies relay actuation and deactivation times.
Covers filter type selection and initial cycle time configurations.
Details regeneration trigger and relay operations for filters.
Entry, hardness, and day override configuration.
Setting the next regeneration time (hour and minute).
Configuration for 28-day regeneration schedule.
Setting the next regeneration time for 28-day cycle.
Configuration for 7-day regeneration schedule.
Setting the next regeneration time for 7-day cycle.
Accessing diagnostics and viewing software version.
Displays volume, days, regenerations, and error logs.
Shows historical usage, capacity, and MAV drive data.
General| Brand | Water Specialist |
|---|---|
| Model | EE |
| Category | Control Unit |
| Language | English |
To Next Page
