Waterite WR2 - User Manual

WR2
Residential Water Filtration System
INSTALLATION AND OWNER’S MANUAL
For all WR2 series residential filter systems
THIS MANUAL IS TO BE LEFT WITH THE OWNER OF THE EQUIPMENT FOR
REFERENCE PURPOSES AND TECHNICAL GUIDANCE. IT IS STRONGLY
RECOMMENDED THAT QUALIFIED DEALER SERVICE PERSONNEL BE CONTACTED
IN THE EVENT OF AN UNKNOWN INTERRUPTION OF SERVICE OR APPARENT
PRODUCT MALFUNCTION. AN ANNUAL PREVENTATIVE MAINTENANCE
INSPECTION BY A WATER PROFESSIONAL IS RECOMMENDED TO ENSURE
TROUBLE-FREE AND CONTINUOUS OPERATION.
R2

Summary

Section 1. Frequently Asked Questions

WR2 System Operation Explained

Describes the two-stage filtration process using sediment and carbon filters for purified drinking water.

Bacteria Removal Capabilities

Clarifies that simple filters do not eliminate bacteria/viruses and mentions periodic purging for disinfection.

Section 2. Unpacking and Installation

Installation Preparation Steps

Covers system location selection, component check, tool gathering, and saddle valve installation.

Faucet and System Mounting

Guides the installation of the specialized sink faucet and mounting the main filter unit assembly.

Tubing Connection and System Flushing

Details connecting system tubing and performing the initial fill and sani-flush procedure before use.

Section 3. Operation and Maintenance

Filter Cartridge Replacement and System Purge

Outlines the process for replacing filter cartridges every three months and sanitizing the system.

Section 4. Troubleshooting Guide

Addendum 1: Pressure Reducing Valve Installation

Pressure Reducing Valve Installation Steps

Step-by-step instructions for installing the pressure reducing valve on the cold water inlet tube.

Addendum 2: Leak Stop Flow Interruptor Installation

Leak Stop Flow Interruptor Installation

Guides the installation of the non-electric leak detection device on the water supply line.

Waterite WR2 Specifications

General

Brand	Waterite
Model	WR2
Category	Water Filtration Systems
Language	English