Watersnake SHADOW MK II User Manual

www.watersnake.com.au
5
IMPORTANT PLEASE READ BEFORE USE.
DEPLOYING YOUR MOTOR
STOWING YOUR MOTOR
To deploy the motor press
down on the pedal (A) and
simultaneously slide the
shaft (B) through the gear
box and lower carefully
into the water.
To stow the motor press
down on the pedal (A) and
simultaneously slide the shaft
(B) through the gear box until
the lower motor unit sits
back in the locking clamps.
There should be a click sound
locking the unit in position.
In addition, then slide the
Depth Collar (C) down the
shaft to the Gear Box and then
tighten the bolt on the Depth
Collar so it is secure.
Ensure your motor is
Properly stowed and
secured before Driving
and or moving your
boat to avoid damage.
HOW TO STOW AND DEPLOY YOUR WATERSNAKE
BOW MOUNT ELECTRIC MOTOR.
Watersnake Distribution Pty Ltd accepts no
liability for injury or damage caused by the
incorrect deployment or stowing of this motor.
PLEASE NOTE:
SHADOW MK II
All manuals and user guides at all-guides.com

Watersnake SHADOW MK II Specifications

General

Brand	Watersnake
Model	SHADOW MK II
Category	Outboard Motor
Language	English