Watlow Series 96 - User Manual

January 1999
(1627)
Made in the U.S.A.
Calibration Manual
Registered Company
Winona, Minnesota USA
ISO 9001
97
TOTAL
3 Year Warranty
CUSCUSTTOOMMERER
SSAATISFTISFAACTICTIOONN
Series 96
1/16 DIN Temperature Controller
with Custom Toolbar (patentpending)
Watlow Controls
1241 Bundy Blvd., P.O. Box 5580, Winona, Minnesota USA55987-5580
Phone: (507) 454-5300, Fax: (507) 452-4507 http://www.watlow.com

Watlow Series 96 Specifications

General

Display	LED
Control Type	PID, On/Off
Input Type	Thermocouple, RTD, Process
Output Type	Relay
Power Supply	24 VAC/DC
Communication Protocol	RS-485
Mounting Type	Panel Mount
Enclosure Rating	NEMA 4X
Accuracy	±0.25% of full scale

Summary

Technical Assistance

Your Feedback

Calibrating the Series 96

Thermocouple Input Procedure

Step-by-step guide for calibrating thermocouple inputs.

RTD Input Procedure

Step-by-step guide for calibrating RTD inputs.

Voltage Process Input Procedure

Step-by-step guide for calibrating voltage process inputs.

Current Process Input Procedure

Step-by-step guide for calibrating current process inputs.

Process Output Procedures

Procedures for calibrating process outputs, including milliamps and volts.

Output 4 Setup and Calibration

Procedures for calibrating Output 4, covering milliamps and volts.

Series 96 Factory Page Calibration Parameters

Ordering Information

How to Reach Us