BUTTON INDICATOR
Button ㉒Power ON/OFF
Press button ㉒ to turn on or turn off the equipment.
Button ㉓ AC Output
Before press button ㉓ to turn on, please make sure the "Power ON/OFF" is ON first.
To stop Output, press ㉓ again.
Button ㉔ MODE
（No IoT capabilities）The default fast charging mode is switched on, and the power will
switch to slow charging power mode by pressed button. The slow charge is charged at
one quarter of the maximum allowable power.
（IoT capabilities）Long press for five seconds to open the IoT reset, the key indicator
blinks, and the key indicator goes off after the reset is completed. At this time, the fast and
slow charging mode is controlled by the APP. The fast charging is allowed to charge with
the maximum power, and the slow charging is charged with a quarter of the maximum
allowed power (the APP can be fine-tuned for the set power of the slow charging).
Button ㉕ Ambient light
Control the switch of the atmosphere light, and the atmosphere light is on by default when
the machine is turned on.
Button ㉖ USB Output
Before press button ㉖ to turn on, please make sure the "Power ON/OFF" is ON first.
To stop Output, press ㉖ again.
⚠ Note: Different Devices with different USB-C cable agreement. If USB-C port not
working, please confirm whether the product has electricity.
Button ㉗ DC Output
Before press button ㉗ to turn on, please make sure the "Power ON/OFF" is ON first.
To stop Output, press ㉗ again.
Button ⑮ EV OLP Reset
EV input overload protection reset button, EV input overload protection after turning off the
input, press recovery.
Button ⑰ AC OLP Reset
AC input overload protection reset button. After AC input overload protection, turn off the
input and press recovery
To Next Page
Loading...