IS-FS-909L-Cellular
You are required to consult the local building and plumbing codes prior to
installation. If the information in this manual is not consistent with local
building or plumbing codes, the local codes should be followed. Inquire
with governing authorities for additional local requirements.
WARNING
!
Installation Instructions
Cellular Sensor
Connection Kit and
Retrofit Connection Kit
Series 909, LF909, 909RPDA
2
1
⁄2" – 10"
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use infor-
mation can result in death, serious personal injury,
property damage, or damage to the equipment.
Keep this Manual for future reference.
WARNING
!
Connection Kit
Retrofit Connection Kit
Monitor relief valve discharge with smart and connected tech-
nology for flood protection. The Cellular Sensor Connection
Sensor Kit activates the flood sensor to enable functions that
detect flood conditions. The Cellular Retrofit Connection Kit
upgrades existing installations by integrating and activating
the flood sensor to enable functions for flood detection. When
a qualifying relief valve discharge occurs, the flood sensor
energizes a relay signaling flood detection and triggers
real-time notification of potential flood conditions through the
Syncta
SM
application.
Use of the SentryPlus Alert
®
technology does not replace
the need to comply with all required instructions, codes, and
regulations related to the installation, operation, and main-
tenance of the backflow preventer to which is it attached,
including the need to provide proper drainage in the event
of a discharge.
Watts is not responsible for the failure of alerts due to
connectivity issues, power outages, or improper installation.
NOTICE
To Next Page
Need help?
General
