11
- You can first adjust, the desired setting temperature with
(-) or (+), press (OK) to start the function. (Default value
22°C)
- In a second time, you can adjust the duration in hours “H”
if below 24H, then in day “d” with (-) or (+), press (OK) to
validate.
The logo will be blink and the number of hours /days left
is displayed until the end of the period.
If you want to stop the Timer function before the end, set
the duration period to “no” with (-) key or use the
navigation keys (◄) or (►).
4 Special function
Keyboards lock Function
Use this function to prevent all change of your settings (In a
child room, public area…)
- To activate the Key lock function, first press maintain the
escape key ( ) and then press simultaneously on the
edition key ( ).
- The “ ” logo will be displayed on the screen.
- Repeat the same procedure to unlock the key board.
To Next Page
Loading...
Need help?
General
