EasyManuals Logo

Watts IntelliFlow A2C-SC User Manual

Watts IntelliFlow A2C-SC
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
IS-A2C-SC-IntelliFlow 2102 © 2021 Watts
Operating Specifications
Electrical Rating: 120VAC, 60 Hz
Circuit Breaker Requirements: 20A GFI*
Max. Appliance Current Rating: 15A
Current Draw: 20mA (with appliance off)
Electrical Cord: 6 ft. type SJT 14 AWG
Max. Temperature: 180°F (82°C)
Max. Pressure: 150psi (10.3 bar)
Max. Operating Pressure Differential: 80 psi (5.5 bar)
Valve Body: Reinforced Polysulfone
Rubber Goods: Buna-N, EPDM
*Ground Fault Interrupter – A GFI circuit is not required for proper operation of the IntelliFlow,
but is strongly recommended as a safety device. In accordance with National Electric Code,
NFPA 70, Section 210.11 Branch Circuits Required, at least one 20-ampere branch circuit shall
be provided to supply the laundry receptacle outlets(s) required by Section 210.52(F). This circuit
shall have no other outlets.
WARNING
!
*Surge Protection – Although a surge protector is not required for proper operation of the
IntelliFlow, it is strongly recommended, especially in areas where power surges or lightning strikes
frequently occur.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Watts IntelliFlow A2C-SC and is the answer not in the manual?

Watts IntelliFlow A2C-SC Specifications

General IconGeneral
BrandWatts
ModelIntelliFlow A2C-SC
CategoryWasher
LanguageEnglish