If the faucet has developed a drip it can be corrected by following the steps outlined below.
12
Adjust Faucet
Remove faucet Spout first. Position
both thumbs on the back edge of
the lever and push forward.
Lever will slide forward and com-
pletely off of the faucet base.
Small brass tee can be turned
1
/2
turn counterclockwise, to adjust the
tension on the black lever. This
adjustment may be necessary to
stop slow drips from tip of faucet.
You may need to repeat the process
until the faucet does not drip. Brass
tee must always end up facing
across body of faucet in order to
slide black lever on.
Step 1
Step 2
Step 3
To Next Page
Loading...
Need help?
General
