Need help?Do you have a question about the Waves DigiGrid D and is the answer not in the manual?
General| Type | Audio Interface |
|---|---|
| Connectivity | Ethernet |
| Mic Preamps | 4 |
| Phantom Power | Yes |
| Sample Rate | 96 kHz |
| Bit Depth | 24-bit |
| Power Supply | External PSU |
| Compatibility | Mac, Windows |
| Software Included | Waves |
Details the headphone output on the front panel.
Lists monitor/line outputs, DC input, network port, and inputs.
Explains controls like Phantom Power, HPF, Phase, MIX, INST, levels, and mute.
Basic connection of one DiGiGrid D to a host computer via Ethernet.
Describes manually assigning devices in the host's Setup window.
Explains using the Auto-Config tool for automatic device patching and inventory.
Explains checking and updating device firmware status via the FW button.
Describes using the ID button to locate hardware devices on the network.
Explains two methods to open the control panel from the device rack or driver control panel.
Details setting clock source, sample rate, and monitoring sync status indicators.
Provides technical details, MAC address, firmware version, and device description.
Explains saving and loading control panel presets and identifying hardware via ID button.
Explains bridging the I/O device and DAW via the SoundGrid ASIO/Core Audio driver.
Details setting the DAW playback engine and routing inputs/outputs to SoundGrid.
To Next Page
