Waveshare Compute Module IO Board Plus - IR Receiver Example

Compute Module IO Board Plus User Manual
13
Version：V1.0，Date：20171101
⚫ Execute command to enter the folder of program
cd /home/pi/CM3/DS3231/python/
⚫ Execute command to run the program
sudo ./ds3231.py
EXPECTED RESULT
The terminal will output the information of date.
IRM
You need an infrared remote controller. Please take the interleaving paper down before using.
BCM2835 CODE
⚫ Execute command to enter the folder of program
cd /home/pi/CM3/IRM/bcm2835/
⚫ Execute command to run the program
sudo ./irm
WIRINGPI CODE
⚫ Execute command to enter the folder of program
cd /home/pi/CM3/IRM/wiringPi/
⚫ Execute command to run the program
sudo ./irm
PYTHON CODE
⚫ Execute command to enter the folder of program
cd /home/pi/CM3/IRM/python/
⚫ Execute command to run the program
sudo ./irm.py