NRF52840 Eval Kit User Manual
Vision: V1.0.1 Date: 2019.01.19 50 / 72
⚫ Open the project SlaveDevice-Bluetooth-BEACON(WeChat) which located in Part-
2-Bluetooth-Slave-Device\USER
⚫ Compile and Download to Eval Kit Board
【Note】The example is different with official examples(line 74-77)
APP_COMPANY_IDENTIFER change to:0X004c
APP_MAJOR_VALUE change to:0x00,0x0A
APP_MINOR_VALUE change to:0x00,0x07
APP_BEACON_UUID change to:0xFD,0xA5,0x06,0x93,\
0xA4,0xE2,0x4F,0xB1,\
0xAF,0xCF,0xC6,0xEB,\
Expected result:
⚫ Open WeChat, and open Shake, there are not Nearby devices detect
⚫ Download example and run it, LED1 will light on
⚫ Open Shake again, Nearby device is detected
To Next Page
Loading...